Strana 11
The test of gloss coats photographed in a softbox optically reduces
the differences between the individual varnishes. This proves that the test
results cannot be divided into good varnish vs. bad varnish, but under extreme
lighting in the previous shots, the differences in the results, which are less
noticeable in indirect light, can be seen better.
I performed the white paint coverage test on a black matte base. I again diluted
the individual test colors (C001, GX01 and LG001) in the same ratio as in the case
of the varnishes and made a line on the surface with one stroke for an objective
representation. The results show a higher amount of pigment in Mr. Color LG001
compared to Mr. Color GX01 and especially C001. We can objectively say that the
coverage of Mr. Color LG001 White is a level further than the aforementioned
colors.
The test results of flat varnishes photographed in a softbox are, similarly
to the gloss versions, less obvious, but compared to them, we can objectively
say that the resulting differences in surface quality are greater between the flat
finishes and the difference between Mr. Color LG113 compared to other Mr. Color
varnishes is visibly greater in a positive sense.
I prepared the same test for the black paint as for the white
(LG002, GX02 and C002). Again, the coverage of the Mr. Color GGX LG002 Black
under the same conditions was visibly higher.
MR. COLOR GGX
-
JOSEF BLAŽEK
reaction will occur, during which the color will
coagulate and form lumps, which negates any
possibility of its use. When applied to already
dried surfaces, the GGX series behaves like
a typical lacquer color, as we know when
using Mr. Color and Mr. Color GX paints. The
ideal base for GGX series paints are all types
of primers, such as Mr. Surfacer 1000, 1200,
1500. GGX paint adheres perfectly to these
matured bases, does not tear anywhere
and creates an extremely durable surface.
We can also apply Aqueous Hobby Color (H) or
Acrysion (N) paints without any problems to
an already hardened layer of GGX paints, since
these water-based paints do not damage the
base varnish in any way. On the contrary, if we
proceed by applying GGX paints to a hardened
surface of Aqueous Hobby Color (H) or Acrysion
(N) paints, I recommend proceeding very
carefully, since lacquer paints contain strong
solvents and can easily damage the lower, less
durable acrylic layer and cause it significant
harm. The solution for such a combination is
to apply several thin layers to a thoroughly
cured surface of water-based paints and
avoid pooling or applying thicker layers. This
procedure will achieve rapid evaporation of
the thinner after spraying, which will prevent
the base layer from reacting.
ConClusions
The new Mr. Color GGX paint range is
a clear step forward. If I skip the benefits
such as the price per ml of paint and the
reduced odor, I see the biggest advantage
primarily in their high coverage properties.
My personal favorite is the perfectly covering
white Mr. Color GGX LG001 and the matte
varnish Mr. Color GGX LG113. At the same time,
I recommend using both thinners intended for
GGX paints, as they visibly affect the results
of use in various combinations and are also
usable for Mr. Color (C series) and Mr. Color
GX paints, which I personally see as a crucial
point in their flexibility of use.
INFO Eduard
11
August 2026