Strana 16
TECHNICS / EQUIPMENT
Open forward edge of the launch rail, into which the communication cable
is connected, located in the missile’s control section.
Lower view of the rocket motor section,
complete with rolleron equipped fins.
Detail showing the method of the rear fin attachment to the rocket section of the R-60M
and the rolleron design.
Power section, on the outer part of which are located the green antennas
of the proximity detonator system and the R-60M launch indicator.
View of the R-60M rocket motor nozzle, fins in an ‘X’ configuration and the arming
pin inserted with an orange warning tag.
For training purposes, a UZR-60 acquisition round was developed (shown here
slung under an L-39ZA Albatros), which was easily identifiable by the three
black bands around the rear of the missile. The fins on this type of piece of
equipment were removed, as was the rocket motor and warhead. An internal
evaluation device that recorded certain data during target acquisition was
installed in these rounds. Two arming pins are installed with RBF tags for
visibility.
INFO Eduard16
May 2025